AMT 282P-95 1-1/2″ Cast Iron Self-Priming Centrifugal Solids Handling Pedestal Pump (Buna-N/SS Seal, 2 HP Min)

AMT 282-P95 1-1/2″ Cast Iron Self-Priming Centrifugal Solids Handling Pedestal Pump is designed, manufactured and tested in the USA. This model has a 3/4″ solid shaft and requires a minimum of 2 HP. A strong cast iron body increases durability and life of volute. AMT Pump Company is a subsidiary of The Gorman-Rupp Company.

Specifications:

• Pump Body: Cast Iron
• Mechanical Seal: Buna-N/SS
• Maximum Flow Rate: 100 gpm – See Performance Chart
• Ports: 1-1/2″ NPT
• HP Required: 2
• Shaft: 3/4″ Keyed Solid
• Maximum Speed: 4000 RPM
• Weight: 38 lbs

AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000.

Series Features:

• Cast Iron & Stainless Steel Construction
  
• Buna-N Mechanical Seals on Cast Iron Models
  
• Viton Mechanical Seals on Stainless Steel Models
  
• Optional Silicon Carbide Mechanical Seals Available
  
• 1-1/4, 1-1/2 or 2 NPT Suction and Discharge Port Sizes
  
• Dual Volute Design Reduces Radial Load on Motors
  
• Maximum Temperature
  -Buna-N 180 F
  -Viton 200 F
  
• Self-Cleaning, Semi-Open Impeller
  
• Solids Handling and Dirty Water Design
• Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings
• Maximum Working Pressure 75 PSI
• Solids Handling to 3/8 Diameter
• Built-In Check Valve on 1-1/2″ & 2″ Models
• Self-priming up to 20 Ft. @ 3450 RPM